pCurNode SBS Crash

SBS pCurNode Crash:

Condition: pCurNode

Location: LangSys.cpp

The crash is caused by a corrupted language file. Copy the language file from another PC and then Overwrite the file on the PC on which the crash occurs. The language file is located in the build folder/Language. In 90% of the cases, it's the English.lang file that needs to be overwritten.

• Related Articles

• Multimon SBS Crash

  Multimon SBS Crash: Condition: SetDisplayDimensions(pDisplay, aDisplays) Message: CMultiMon::SetConfiguration: Dimensions not found for display Multimon configuration settings incorrect - SimCAB display PC was connected to the multimon network when ...

• SBS White Screen

  If SBS on the operator screens shows a white screen instead of the usual blue, it means the screens have not been set up correctly. The issue is due to the different operator screens having different resolutions OR different scaling and the ...

• Determine Software Build Version

  In order to determine the exact version of the software build follow the steps below. Open SBS on the simulator computers, using SBS Manager. On the instructor computer, usually PC1. Click on the Help menu option, located on the top left of the SBS ...

• Fixing an Ethernet Motion Platform which is unresponsive in SBS but connects correctly in the Ethernet Hardware App (EHA)

  If a motion platform performs its homing movement on power on and you are able to connect to it via the EHA but it does not work in SBS then the most likely culprit is that the serial number of the motion base does not match the serial number in the ...

• Fix Low Frame Rate

  If SBS is running slowly do the following to rectify the issue: Check SBS version Ensure that SBS is with the correct tag (server/client), depending on the PC SBS is running on. The SBS should run with the server tag on the instructor PC and with the ...