Automatic Power On

Gigabyte Motherboard AC BACK BIOS Settings

Follow the steps below in order to make sure the simulation computer starts up automatically when power is provided to the simulator system.
  1. Press DEL while the PC is booting up to enter the BIOS.
  2. Navigate to the Power tab.
  3. Ensure AC BACK is set to Always On.
  4. Navigate to the Save & Exit tab.
  5. Save the settings and exit the BIOS.

    • Related Articles

    • Logitech Audio Controller Settings

      The audio controller needs to be set up so that it looks like the picture below. Press the Power button to turn the audio controller on. Press the Input button so that the Input LED is set to Position 1. Press the Stereo button so that the Stereo LED ...

    • Multimon SBS Crash

      Multimon SBS Crash: Condition: SetDisplayDimensions(pDisplay, aDisplays) Message: CMultiMon::SetConfiguration: Dimensions not found for display Multimon configuration settings incorrect - SimCAB display PC was connected to the multimon network when ...