Nvidia 3D Settings

Nvidia 3D Settings

All simulator PCs should have the same Nvidia 3D Settings. To change the settings, follow the steps below:

  1. Right click anywhere on the desktop and then choose the NVIDIA Control Panel option. You may need to select "Show more options before the NVIDIA Control Panel option becomes visible.
  1. Click on Manage 3D setting in the left pane of the window that opens up.

  1. Next, ensure the following settings are set
    Feature
    Setting
    Anisotropic filtering
    16x
    Antialiasing Mode
    Override any application
    Antialiasing FXAA
    Off
    Antialiasing Setting
    8x
    Vertical sync
    Off
  1. Click Apply and then close the NVIDIA Control Panel
  2. Restart the PC


    • Related Articles

    • Gigabyte Motherboard AC BACK BIOS Settings

      Follow the steps below in order to make sure the simulation computer starts up automatically when power is provided to the simulator system. Press DEL while the PC is booting up to enter the BIOS. Navigate to the Power tab. Ensure AC BACK is set to ...

    • Logitech Audio Controller Settings

      The audio controller needs to be set up so that it looks like the picture below. Press the Power button to turn the audio controller on. Press the Input button so that the Input LED is set to Position 1. Press the Stereo button so that the Stereo LED ...

    • VR Simulation Performance Drops Suddenly

      If the performance of a VR system suddenly drops and the PC starts to respond slowly resulting in a stuttering simulation with low frame rate, check if GPU and VRAM usage in Task Manager. If the VRAM usage is above 90%, the issue could be that ...

    • Connecting to the SimCAB™ via the Ethernet Hardware Application (EHA)

      First, determine the exact version of the software build being run on the simulation computer Verify the Mapping Files Run any scenario that is compatible with the SimCAB™ on the motion base. You need to start the scenario and ensure that any of the ...

    • Multimon SBS Crash

      Multimon SBS Crash: Condition: SetDisplayDimensions(pDisplay, aDisplays) Message: CMultiMon::SetConfiguration: Dimensions not found for display Multimon configuration settings incorrect - SimCAB display PC was connected to the multimon network when ...