Determine the Computer Description/Name of a Simulation Computer in a 3 PC Simulation System

The Computer Description/Name of a Simulation Computer in a 3 PC Simulation System must adhere to the following convention:

      [Client Code][Client System Number][PC Designation]

The PC Designation of the simulator computers is as follows:

      Instructor (1st) Computer: I
      Operator (2nd) Computer: O
      Spare (3rd) Computer: S

E.g. The instructor (1st) PC in the third simulator system belonging to the ACME company will have the Computer description: ACME3I.

If you are not sure on what to name the simulation computer, check the other simulation computer names for the [Client Code] and [Client System Number], or contact 5DT support.

• Related Articles

• Free up space on a simulation computer's hard drive

  First, determine the exact version of the software build being run on the simulation computer Delete Unnecessary Database Backups Open the following location on the PC with the full hard drive: C:\5DT. Open the Database_Backup folder. Open the folder ...

• Determine Software Build Version

  In order to determine the exact version of the software build follow the steps below. Open SBS on the simulator computers, using SBS Manager. On the instructor computer, usually PC1. Click on the Help menu option, located on the top left of the SBS ...

• Connecting to the SimCAB™ via the Ethernet Hardware Application (EHA)

  First, determine the exact version of the software build being run on the simulation computer Verify the Mapping Files Run any scenario that is compatible with the SimCAB™ on the motion base. You need to start the scenario and ensure that any of the ...

• Gigabyte Motherboard AC BACK BIOS Settings

  Follow the steps below in order to make sure the simulation computer starts up automatically when power is provided to the simulator system. Press DEL while the PC is booting up to enter the BIOS. Navigate to the Power tab. Ensure AC BACK is set to ...

• Fix Low Frame Rate

  If SBS is running slowly do the following to rectify the issue: Check SBS version Ensure that SBS is with the correct tag (server/client), depending on the PC SBS is running on. The SBS should run with the server tag on the instructor PC and with the ...